Sump Pump Water Level: the Hardware
The sensor mesure the time it took to an ultrasound to get back to it. First, cut a 3 inches hole in the thicker 4”X6” piece of wood. Stick the pieces of wood together.
The sensor mesure the time it took to an ultrasound to get back to it. First, cut a 3 inches hole in the thicker 4”X6” piece of wood. Stick the pieces of wood together.
This Raspberry-Pi based Garage door opener is capable of controlling of your garage door which enables you to open/close the door when desired,
This instructable is all about monitoring the state of relays using a Raspberry Pi. In the particular case we will have a look at a sophisticated Telegärtner DoorLine Pro intercom
This tutorial will show you how to build a simple Raspberry Pi home automation system that will allow you to control appliances in your home from anywhere in the world.
I had heard about GPIO pins on the raspberry pi and decided to do something with it. And with the holidays coming,
This is just the beginning of home automation. A truly uber home automation system should have available many different types of inputs, and be able to affect many types of outputs.
This is the project I have done alone. I tried to make something could be helpful to those Taiwanese whose age is old.
Control relays connected to you RaspberryPi using Android app. Setup multiple RaspberryPi devices around your house.
you can drive the digital outputs of the Phidgets 1018 remotely, in this tutorial instead we will check the status of the digital inputs
It has become apparent that WebIOPi is not yet compatible with the Raspberry Pi v2. If you are following this tutorial, you must be using the first-generation Pi.