Ring Doorbells all feature a doorbell and a camera, but they also include a circular light on the front. This light may provide a lot of information about what’s going on with your Ring Doorbell, but it might be difficult to understand if you’re new to this sort of technology. To assist, we have provided an explanation for the Ring Doorbell flashing blue light.
Different patterns on your Ring Doorbell might indicate many things. I was likewise puzzled at first by my Ring Doorbell blinking blue.
However, because of difficulties such as live view not working, I had to dabble in Ring doorbell maintenance several times, including when I prepared a guide on how to install them to a door.
- Your doorbell’s continuous flashing blue light shows that it is charging.
- As the battery life increases, the circle fills up. When the battery is completely charged, the light is solid blue, and it turns off when it is not charging.
- The blue light is flashing – Which indicates that the doorbell is linked to a network. If you notice the blue light flashing on and off for a second, it indicates that the camera on the Ring doorbell is turning on. If it continues, you have a boot loop.
In case the reason for flashing blue light does not match with the highlighted statement then you might need to look for somewhere else to troubleshoot it by triggering some alarms and checking your internet connection.
What Causes Your Ring Doorbell to Flashing Blue?
When the device starts up or reboots, the Ring Doorbell light will flash on and off at one-second intervals. The device has been successfully configured when the blue light flashes four times. The Ring Doorbell has been reset to its factory default settings if a rapid blue light flashes followed by a white circle.
It may flash in different blue and white patterns, and each design can convey a distinct message.
To ensure that your Ring Doorbell is functioning properly, it is critical to understand the many signals it may transmit through its light.
The table below explains each of those messages:
|Blue Light Pattern
|The explanation behind every blue light pattern
|Blue light flashes on and off at one-second intervals
|Ring Doorbell is starting up or rebooting
|Blue light flashes and moves upwards
|Ring Doorbell is in the process of connecting to a Wi-Fi network during setup
|Four segments of the blue ring light flash four times, followed by a white circle.
|Ring Doorbell setup process is complete; the doorbell is ready for use
|The top half of the blue ring light blinks
|During setup, the Wi-Fi password you entered in the Ring app was incorrect. For Ring Doorbell Pro, this may also mean the built-in battery is completing its initial charge.
|Short, fast blue light flashes, followed by a spinning white circle
|A factory reset has been completed
|The blue light spins
|The doorbell button was pressed
|Blue light is solid
|Two-way audio is in use
Most Common Reasons for Ring Doorbell Flashing Blue:
Ring Blue Light Flashing During Set-Up
When your Ring Doorbell is in setup mode, the LED ring light should be spinning rather than flashing. While the doorbell is attempting to connect to your Wi-Fi network for the first time, the light will change to a flashing blue, upward-moving pattern.
Only the top part of the blue light will blink if you input the erroneous Wi-Fi password. To finish the setup, you must input the password again.
Four blue flashes followed by a white circle at the completion of the setup process indicate that the doorbell is ready to use!
Randomly Ring doorbell Blue Light Flashing
If your Ring Doorbell LED blue light continues to blink after the setup procedure is complete, the device is most likely restarting. This occurs if the doorbell loses power or receives an automated firmware update.
All you have to do is wait till you see the light on your Ring Doorbell blinking blue at one-second intervals. The gadget normally takes a few minutes to restart.
Ring Doorbell restarting every now and again should not be an issue. However, if it continues, it might become problematic.
Charge your Ring Doorbell batteries on a frequent basis to avoid this.
In the case of hardwired doorbells, make sure that the wires are intact and connected securely.
Ring Doorbell Flashing Blue When Charging
The charging blue light you see on your Ring Doorbell will depend on the model you own:
If you have the first or second-generation Ring Doorbell, you may charge the battery by putting the charging wire straight into the back of the doorbell. The charging of the doorbell is indicated by the flashing blue light. As the battery life grows, the circle light will fill. The battery is completely charged when the light is solid blue.
Other Ring Doorbell battery-operated variants, such as the Doorbell 2 and 3, include a detachable battery that may be charged directly. If you remove the battery from the doorbell, there will be no more LED lights until the battery is replaced.
The Ring Doorbell Pro is a hardwired device, however, it takes many hours of charging via the associated cables after its first setup. Following setup, this charge will commence automatically. The top part of the blue ring light will flicker blue when charging. When the charge is complete, the light will turn off.
To learn more about charging your Ring Doorbell, check out this article.
Ring Chime Flashing Blue Light
The Ring Chime and Ring Chime Pro both include a circular LED light, however, the little light is located in the top-right corner.
Ring Chime devices operate in tandem with your Ring Doorbell and Ring security cameras to strengthen and strengthen your home’s Wi-Fi network.
Ring Chime’s blue light, like Ring Doorbell’s, displays the device’s condition. A steady blue light indicates that Chime is functioning properly; no light indicates that the device is not receiving power, and a flickering blue light indicates that something else is wrong with your device.
There are four reasons why the blue light may be flashing:
- The device is in setup mode.
- The device is rebooting.
- The device is reconnecting to the Wi-Fi.
- An automatic update is being installed.
Ring Doorbell Light Spinning
If there are no stored credentials in the Doorbell, the spinning white light shows when it attempts to establish a Wi-Fi connection. As long as this is the case, Ring will be unable to join the Network.
You won’t have to do anything about this status light because it will turn off after 10 minutes of being unable to connect to Wi-Fi.
Although the Doorbell not connecting to Wi-Fi may be the reason for the alarm, the solution is simple.
Ring Doorbell Camera Flashing Blue and White
When the Ring Doorbell begins to flash blue and white, it indicates that the Doorbell is being factory reset.
This is shown when you do a factory reset from your phone, but if you continue to see this identical sequence without doing anything, the Doorbell may have been caught in a reset cycle.
At that time, contacting Ring support would be the best line of action.
When you initially turn on the doorbell, you will witness another blue and white sequence, but this time with four individual LEDs.
This means that the setup method you followed was successful; nevertheless, it may take up to an hour for the system to completely power up.
Troubleshooting Ring Doorbell Lights
- Firmware Update: A Ring firmware upgrade should only take around 10 minutes. If your Ring Chime’s flashing blue light does not cease after 10 minutes or flashes frequently, there is most likely a problem.
- Wi-Fi Functionality: Check that your Wi-Fi is functional on another device in your houses, such as your phone or computer. If it isn’t, try disconnecting the power cable for at least 30 seconds and then plugging it back in. Chime may take several minutes to reconnect to the Internet.
- If your Wi-Fi is operating properly but your Ring Chime is still often disconnecting: consider enhancing the connection between your router and Ring Chime. This may be accomplished by bringing the devices as near together as feasible. You might also try disconnecting additional Wi-Fi devices from the network.
- Contact Ring Support: If none of these methods work for you, it might be due to an internal problem with the doorbell, such as a faulty battery, wiring, or the LED light itself. In this instance, your best bet is to contact Ring customer service for assistance. They will walk you through certain diagnostic procedures to diagnose the issue and locate a solution without voiding your warranty.
Frequently Asked Questions:
What does it mean when your Ring Doorbell is flashing blue?
Ist Scenario: Your doorbell’s persistent flashing blue light indicates that it is charging.
2nd Scenario: As the battery life increases, the circle fills up. When the battery is completely charged, the light is solid blue, and it turns off when it is not charging.
3rd Scenario: If your Ring Doorbell is flashing blue, it means that someone is at your door. The ring will send you a notification through the app when someone arrives.
How do you reboot a Ring Doorbell?
- Tap on the three lines () on the top left in the Ring app
- Tap Devices
- Select the doorbell or security camera you want to check
- The next screen is the Device Dashboard
- If you’re disconnected from wifi, you’ll see a red wifi image on the top of the screen ()
- You can tap the image for troubleshooting steps.
- You can also tap on the Device Health tile (instructions below) to see your wifi connection.
- If you’re disconnected from wifi, you’ll see a red wifi image on the top of the screen ()
- Tap on Device Health
- Scroll down on the Device Health screen to Tools
- Tap Reboot this Device
Why is my Ring doorbell flashing white after charging?
If you continue to see this flashing white light on your Doorbell after charging, it indicates that you have either lost internet connection or have insufficient power.
You can try a few troubleshooting procedures to resolve this problem.
- Check your internet connection in the Ring app. If the device is “Offline,” you know the internet is your issue.
- Reset your router and Ring device. Turn off the router and Ring the doorbell. Wait a few minutes before turning it back on and trying to reconnect again.