How To Change The 4 Digit Code On A Schlage Lock

Schlage is the leading manufacturer of residential entrance door keyless entry systems.

As long as you know the Schlage keypad programming code, you can have up to 19 separate users coded to run the lock and can uninstall a user at any time. To activate or disable the lock’s vacation mode, or to make other programming modifications, such as turning the lock’s beeper on or off or activating the switch lock, you must have the programming code. You can enable or disable any one of these codes whenever you want.

How to Change the 4-digit code on a Schlage lock is a quick and easy way to improve security and give you more control over who has access to your home.

What you’ll need:

  • Your Schlage lock’s programming code
  • A new 4-digit code

Steps:

  1. Locate your Schlage lock’s programming code. This is usually a six-digit number that is printed on a yellow label on the back of the lock or in the user manual.
  2. Enter the programming code on the keypad. The Schlage button will flash orange or amber three times and beep.
  3. Press the Schlage button and the number 1 button at the same time.
  4. Enter your new 4-digit code on the keypad.
  5. Enter your new 4-digit code again to confirm.
  6. The Schlage button will flash green and beep once.

Your new 4-digit code is now set!

For in detail explanation scroll down below for more information.

Two Types of Buttons

There are 10-digit buttons on the outer face of the keyboard, plus a “Schlage” button located at the top of the keyboard. Both the six-digit programming code and the four-digit user codes can be entered using the number keys.

Change The 4 Digit Code On A Schlage Lock

Two Types of Codes

To program your Schlage keypad, you must first understand the two types of codes: the six-digit programming code and the four-digit user code.

Programming Code: 6-Digits

First, there is a programming code of six digits that is used to enable the lock-programming set’s features. The first step in programming individual four-digit user codes would be to enter this code. This security preset comes with your lock, but you can change it to a code of your choice as well. You must know this code to program the lock.

User Codes: 4-Digits

Second, Four-digit user codes still exist. They are the routine codes that in regular service would act as the “keys” to unlock your door.

The default user codes can also be found on the back of the keypad or in the User Manual.

Up to 19 4-digit user codes, including a primary entrance code and visitor codes, can be stored! This code must differ from the first four digits of the given programming code.

  1. Smart Home: Electronic Door Lock with Remote Control
  2. Smart Home: August Smart Lock Homekit Enabled
  3. List of Schlage Keypad Deadbolt

Let’s start with How to Change the 4 Digit code on a Schlagle Lock FE575, FE595 and fe695 ?

Steps

Step 1: Find your 6-digit programming code

  • Locate and write down the six-digit programming code for your Schlage keyless entry. This is the first code you will input, and it will activate the lockset, allowing you to perform all of the programs. The original programming code can be found on the yellow label on the installation instructions for your keyless lockset or on the backside of the deadbolt lock.

 If the lock is used or you have forgotten your previous entry code, you’ll need to reset the keypad to its default settings (Click here to jump down to that section).

How To Change The 4 Digit Code On A Schlage Lock

Step 2: Enter your 6-digit programming code

  • Next, enter your six-digit programming code on the keypad and Wait for the “Schlage” button to flash amber or orange and beep three times. The “Schlage” button will remain illuminated to indicate that the lock is ready for reprogramming. 

Step 3: Press the Schlage and number 1 buttons at the same time.

  • Press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code. 
  • Wait for the “Schlage” button to beep and flash three times.

Untitled 1

Step 4: Enter your new entry code

On the keypad assembly, enter your new user code.

This must be a one-of-a-kind code that is not presently in use as a primary or guest entry code. It also cannot be your programming code’s initial four digits.

Step 5: Enter your new 4-digit entry code again

  • Re-enter the same four-digit code to confirm the change.
  • The “Schlage” button flashes green and a long beep to indicate successful reprogramming.

How to Add  4 Digit User Code to a Schlage Lock (Guest Code)

Schlage keypad locks may save up to 19 different user codes, which you can share with friends, family, or neighbors. Guest codes are useful since they allow you to generate temporary codes that can be easily erased afterward.

To add more 4-digit user codes, follow the procedures below!

Step 1: Enter your six-digit programming code

  • Enter your 6-digit programming code on the keypad. The Schlage button will blink orange three times and then beep 3 times.

Step 2: Press the Schlage button and then the number 1

  • Press the Schlage button and then press the number 1 on the keypad assembly. The Schlage button will blink orange three times, followed by 3 lock beeps.

 Changing a 4 Digit Code On A Schlage Lock

Step 3: Enter your new 4-digit code

  • Enter your desired four-digit entry code on the keypad.

This must be a unique code that is not currently being used as a primary entry code or guest code. It also can not be the first four digits of your programming code.

Step 4: Confirm your 4-digit code

  • Confirm your new code by entering it again once more. If everything is done correctly, the Schlage button will flash green, followed by one long beep to verify your new code. Test the code to ensure everything works!

To add additional codes, repeat the steps above. Schlage keyless entry locks can store up to 19 user codes!

To remove a temporary code, follow the steps in the next section!

How to remove the 4 digit code on a Schlage Lock

Steps

  • Enter the programming code supplied with the system. It was printed, along with the default user codes a six-digit code, on a yellow label on the back of the lock.
  • Then press the “Schlage” button and the number “2” button simultaneously to remove a previous entry code – the “Schlage” button will flash and beep three times.
How To Change The 4 Digit Code On A Schlage Lock
  • Enter the four-digit entry code you want to remove— the “Schlage” button will flash and beep three times.
  • Re-enter the same four-digit entry code for confirmation.
  • The “Schlage” button will beep one long beep and flash green, indicating a successful deletion of your previous entry code.

For more information on how to change the keypad lock without programming code and how to change the code of Deadbolt if you failed to understand the above method then follow this link to know more about it.

Conclusion

Changing the 4-digit code on your Schlage lock is a simple process when you understand the programming code and user codes. With up to 19 user codes available, Schlage provides flexibility and security for your keyless entry needs. For more information on Schlage locks and programming options, refer to the provided resources.

More information and inquiry go to their:

Support or Schlage Customer Service Centre (find a near center near to you and call them).

Schlage Customer Service Contact Number:

  Schlage Residential (US) For products installed on single-family homes   Schlage Commercial (US) For products installed on institutional, retail, or healthcare buildings   Customer Service in Canada
For both Residential and Commercial products
Phone 888-805-9837 877-671-7011   800-900-4734
Hours of operation: Monday-Friday: 8 am to 7 pm ET
Saturday: 9 am to 4:30 pm ET
Monday-Friday: 9 am to 7 pm ET       Monday-Friday: 8 am to 5:30 pm ET

Learn more: A detailed topic of Schlage keypad deadbolts and which one is right for you.
Frequently Asked Questions:

How to find Schlage programming code?

Your Schlage Lock Programming Code is normally placed on a white label on the front of the user handbook.

Remove the lock from the door to discover the Programming Code—printed on a white sticker on the back of the keypad assembly if you don’t have the user manual.

What should I do if the red Schlage button is blinking even though no codes have been entered?

If the red Schlage button blinks without even entering your code, it indicates that the lock is already low in battery.

Why am I unable to create a new user code?

One of the reasons for this is that your Schlage lock already has 19 codes. You can remove one user code and replace it with a new one.
Another cause might be that the second code you entered differed from the first. Re-enter the code if necessary.
It’s also possible that the new code you typed was identical to your programming code.

How do I enable vacation mode on Schlage FE575, FE595, and fe695?

Here’s how to do that:

Enter the Programming Code and wait for three orange lights and three beep

Press the Schlage button and then press key 4.

The lock will illuminate green and beep once, showing that vacation mode is now in effect.

To disable vacation mode, enter your Programming Code.

How to Reset the Schlage keypad lock?

Go for complete guidelines for resetting the keypad lock

Why do I need a Schlage Smart lock reset code to reset?

In general, a programming code is required to change or create a new user code, however, you may reset or erase all 4-digit user codes without requiring a code. Click here to discover how to reset the code.

How to Program Schlage Lock?

  • Enter a 6-digit programming code.
  • Wait until you see a Schlage button flashing orange light and the lock beep three times, next press the Schlage button.
  • Then, Press 1 on the key and wait for the button to flash orange, and the lock beeps three times. Enter a new 4-digit user code and wait to see the button flash orange and beep three times, Now Re-enter your 4-digit user code and the light flashes green once. 

Done, this is how you can program Schlage lock. 

How to find Schlage Smart Lock Reset Code?

The smart lock reset code can be obtained by changing a four-digit code written on the back and inside the cover as the default code or you can get this code from a manual that came with the lock. 

Schlage keypad lock programming guide: Click here:

List of Schlage Keypad Lock

3/5 (1 Review)

About The Author

Hassan Zaka

I am an expert in accounting and possess diverse experience in technical writing. I have written for various industries on topics such as finance, business, and technology. My writing style is clear and simple, and I utilize infographics and diagrams to make my writing more engaging. I can be a valuable asset to any organization in need of technical writing services.

Follow Us:
LinkedinTwitter

3 thoughts on “How To Change The 4 Digit Code On A Schlage Lock”

  1. I have unsuccessfully attempted to change the 4 digit entry code on a home I recently purchased. I do not have, and cannot attain the programming code unless it is still on the back of the lock. Before I remove that, in the event the code has been removed, what are my options? As far as I can surmise, I have the Satin Nickel Camelot with Flex-Lock and Accent Lever model but no idea on when that may have been installed. Please advise.

  2. Kristen kelley

    We have recently moved into a house with the Schlage lock. There is no key to unlock it and we have been unable to pull the front part down to get access to the 6 digit code. When we asked the previous owners, they said they googled it and changed it that way. We have been unable to find how to do it without the 6 digit code. Is there a way to change the code without needing the 6 digit code? And if not, how do we get the code box off if there is no key to it?

    1. H Automations

      You have two options: either get the manual from a previous owner or you have to open the front part from the inside direction of your house to get the 6-digit code… if you failed to use both options then you have to replace the lock with the new one…

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top