Dyson is known for creating fantastic quality cordless vacuums. They produce a vacuum that is convenient to use and can reach even in hard places. Another thing that makes it unique is that it does not contain any cord. People who wish to heaven a cordless vacuum can get their hands on the Dyson V6 vacuum, which is among the most popular products from Dyson.
Dyson V6 is a fantastic vacuum. But some people have faced some trouble in using it. People have reported a red light flashing from the Motorhead of Dyson. Some people need help understanding why this is happening. Every single vacuum cleaner from Dyson consists of a light that blinks. If the light is flashing, there is some problem with the vacuum.
Let’s take an example to understand it more clearly. The red light will also flash if you have not connected the filter to the Dyson cleaner. Similarly, if there is a problem with the vacuum cleaner’s battery, it is also indicated by the flashing of the red light. So if you have Dyson cleaner V6 facing the same issue, we will provide you with guidelines on how to fix this problem. So first, let’s start with all reasons that could be behind the flashing of the red light.
What is the reason behind the blinking of the red light on the Dyson cleaner?
When you are using a Dyson vacuum six cleaner, sometimes there is a red light flashing continuously. The reason for it is related to the battery of the vacuum cleaner. The owner of the company itself even confirmed it. Out of 100 cases of flashing red light, 9 percent is because of defects in the battery. So, we can say that flashing occurs because of the Dyson vacuum battery. So, the only thing you can do is replace the battery.
If there is a flashing red light, you must do a battery replacement. If the red light in the vacuum stays on for a more extended period, that indicates that the battery inside the cleaner is broken. So all of these are the common issues related to the flashing red light on Dyson V6. Now we will be looking at the ways how to treat this problem.
· Red light flashing ten times
People who use a vacuum from Dyson might have seen red light flashing. First, you need to Look at how much time it takes. For example, if you see the red light flashing ten times only or less, then there is an excellent chance that it is occurring. The flashing happens if any of the parts are not working.
Another reason is that the light will also flash if there is any problem with the vacuum motor. So here we can see that red light is an indicator to inform other people that there is something wrong with their vacuum cleaner. But before replacing a battery or changer motor, you need to look into the vacuum cleaner. Check if there is no significant change that needs to be made.
· Red light flashing 32 times
It is quite a specific number that many people observe. If you see that your Dyson cleaner Is flashing the red light almost 32 times, it indicates a significant issue with the battery. If we look clearly, there may be many reasons for the failure of the storm. Either the battery has become too weak because of excessive usage. Or it would be best if you placed the battery correctly.
If the Dyson V6 is flashing red light 32 times, then that means there is undoubtedly some issue with the battery.
How to fix the problem of flashing Red lights?
To fix this problem, there are various methods available for example; you can easily replace the battery by purchasing a new one. But for that, also you need to understand how the battery is placed.
So here are some of the various methods you can follow to fix the problem of flashing red lights.
1. Motorhead removal
First of all, Motorhead is removed. After that, inspect if there is any fault in the wiring or rotating brushes that have been stuck anywhere. So if it does not solve the problem, then let’s move to the other one.
2. Fault in voltage
If you see the flashing red light, it is present on both sides. If flashing occurs on more than one side, then there is a fault in the voltage. The reason for under voltage can be because of the power supply through which you have connected the device. So you need to check for the wiring of your house.
3. Refasten the padlock of the vacuum cleaner
The brick strip of the vacuum cleaner is made up of carbon fiber. It also consists of a bracket. It consists of a lock that is a padlock that can be unlocked after some time. But it is recommended that you should open it if you have used the vacuum intensively. So now what you have to do is to change the padlock. Remove it, and instead of adding a small coin before you start vacuuming, check if it is in the right place again.
4. Clean the Brush bar
During the vacuum, some of the dirt and debris can be stuck inside the brush bar. So it is always said that you should clean it regularly. If you do not do so, the brush bar will stop working, which is a significant issue. The brush bar is mainly involved in cleaning as all the dust gets inside the vacuum’s brush bar. It plays an essential part in the void. If you want to clean the brush bar, you first need to remove it from the vacuum cleaner. It is done by removing the end cap. Turning the cap in the anticlockwise direction would be best so you can unscrew it easily.
5. Visually Inspect the Dyson’s Battery
Visual inspection of the battery of Dyson is essential. It will help you to check if there is any physical damage to the battery. You can prevent the following defects in the battery of Dyson.
It includes:
- Cracks and bends
- Bulging
- Puffing
- Deformation
- Discolouring
- Odor or smell is also a good indicator of damage to the battery.
Suppose any of the problems mentioned above are occurring in your Dyson vacuum. Then you need to discard the battery quickly. Physical damage may also arise from improper storage, use, and overheating.
6. Charge the Dyson’s Battery
If all of the methods don’t work, you can try charging the Dyson battery again. If you want to set, then follow the given two methods. The first method is the direct connection of the power plug. If not, then you can also charge the unit which is present from the dock.
7. Reset the Dyson’s Battery
Even by charging the Dyson battery, the problem still needs to be solved. Then follow the given steps:
- Unplug the Dyson charger from the power source
- Re-plug it again
- The Dyson vacuum is connected again to the charger
- Press the power button for at least 20 seconds.
- Release the button. Your Dyson battery is reset.
8. Replacing the Dyson Battery
First, open the vacuum cleaner and look where the battery is placed. Remove the last cells which are present. Although if the cells are older and use for a more extended period, then it’s hard to remove. You can take the help of a screwdriver. So the best and easiest way to fix the battery issue is to replace the battery. By replacing the battery, your vacuum will start working correctly, just like a new one. Also, it enhances the suction power and will give excellent performance.
To replace the battery, you might need to wait for a long. It takes approximately 2 to 5 days to replace the battery. However, it depends upon battery availability or the part of the battery required. However, you can check for the warranty of your Dyson cleaner. If it is under contract, the company will cover all the expenses. However, you can also remove the battery by yourself.
9. Contact customer support
If you face any difficulty in replacing the battery or cleaning the brush bar, you can take the help of customer assistance. Dyson provides reasonable service to all its customer. You can call the company anytime, as customer support is available 24/7. Dyson’s friendly team will surely help you and provide better solutions.
Summing Up
Hopefully, we have provided you with all the solutions to repair the problem of the flashing red light. Your hand-hand stick needs a fresh battery; don’t toss it away. Getting a battery with a rated power of 3500mAh or greater is a recommended upgrade because many replacement batteries have an enormous capacity compared to stock batteries.
Make sure that whatever method you follow, you should first read the instruction manual provided with the Dyson vacuum. For example, if you are removing the battery with a new one. Then check after putting back if you have set the batteries in the same position or not. You can do this by yourself. There is no need to worry or call an expert. Save your money as well as time.
Always clean the vacuum’s brush bar, as some dust and debris may accumulate. If you cannot do it alone, you can take the help of customer support.
You might want to see this:
- Dyson V6 Troubleshoot
- Dyson V11 Troubleshoot
- Why Dyson V11 Airway Blocked but No Blockage – How to fix it.
- Dyson V7 Troubleshoot
About The Author
Hassan Zaka
I am an expert in accounting and possess diverse experience in technical writing. I have written for various industries on topics such as finance, business, and technology. My writing style is clear and simple, and I utilize infographics and diagrams to make my writing more engaging. I can be a valuable asset to any organization in need of technical writing services.
Follow Us:LinkedinTwitter